Any board, even yours
Stripboard, perfboard, tripad, breadboard-style, Elex and other commercial patterns are included. Draw your own board in the editor: strips, groups, rails, missing holes.
Lay out your circuit on stripboard, perfboard or any prototyping board, connect several boards and what sits in the enclosure, catch mistakes before you solder, then wire it up with a checklist. Free, in your browser, no account.

Stripboard, perfboard, tripad, breadboard-style, Elex and other commercial patterns are included. Draw your own board in the editor: strips, groups, rails, missing holes.
On perfboard, draw the solder on the copper side: bridges between neighbours, traces, and solder pads where several wires meet. The copper-side view is mirrored, like the real board in your hand.
Strips, cuts, jumpers and solder are taken into account as you draw. Hover a hole to see its net, click a net to isolate it and dim everything else.
Several boards in one project, with what sits in the enclosure: power jack, front-panel LED, wired module. Wire them, plug connectors together and draw your cables pin by pin, Y cables included. Nets and their names follow across the whole assembly, and the checks cover it all.
Shorts, reversed electrolytics and LEDs, mixed voltages, split grounds, bare wires touching… and every isolated solder point circled in magenta: the missed joint is found before power-up.
Import the netlist exported by KiCad: missing or extra connections, missing parts and different values are listed. When everything matches, the board is marked as conforming.
Cuts, solder, jumpers, low components, then ICs, connectors and modules: tick each item as you go, placed items fade on the board. Progress is saved with the project.
ESP32, Raspberry Pi Pico, XIAO, D1 mini, Arduino, MAX98357A, ADS1115, DS3231… with their pin names and real footprint in holes. Free wires and cables reach what sits in the enclosure.
Included parts: resistors, capacitors, diodes, LEDs, DIP ICs and SMD adapters, TO-92, TO-220 with heatsink, trimmers, relays, connectors, ESP32, Raspberry Pi Pico, XIAO and Arduino modules, sensors, DACs and converters, plus your own board templates.